Single-axis extruder

FS series

Single-axis extruder

The FS series is a high quality general-purpose single-axis extruder that pursues high performance, operability and cost efficiency.

Features

  • It specializes in general extrusion of general-purpose.
  • It is capable to handle various extrusions such as deformed object, tube, pipe, film, sheet and wire coverings.

FS extruder standard specifications

FS30 FS40 FS50
Throughput rate kg/h 5 - 25 10 - 35 15 - 60
Screw Diameter mm 30 40 50
L/D - 22 25 28 25 28 32 25 28 32
Acceptance for bent - - - - - -
Rotation speed min-1 - 120 - 200 - 200
Main motor kW 2.2 - 3.7 3.7 - 15 7.5 - 30
Cylinder heating classification - 3 3 4 4 4 5 4 4 5
Hopper capacity L 20 30 40
Machine center height mm 1100
Size of machine Length mm 1400 1500 1600 1700 1900 2100 2300 2500 2800
Width mm 800 800 900
Height mm 1500 1700 1700
Machine net weight kg 650 700 750 1000 1200 1400 1300 1500 1700
FS65 FS75 FS90
Throughput rate kg/h 45 - 150 70 - 220 90 - 300
Screw Diameter mm 65 75 90
L/D - 25 28 32 25 28 32 25 28 32
Acceptance for bent - - - -
Rotation speed min-1 - 200 - 200 - 200
Main motor kW 15 - 45 30 - 75 45 - 90
Cylinder heating classification - 4 4 5 4 4 5 5 5 6
Hopper capacity L 60 80 130
Machine center height mm 1100
Size of machine Length mm 2700 2900 3200 2800 3050 3350 3400 3700 4000
Width mm 1200 1400 1400
Height mm 1900 2000 2000
Machine net weight kg 1900 2200 2500 2300 2500 2700 2600 2700 3300

Go to the top

GS Series

Single-axis extruder

GS is a new model extruder that reflected numbers of requests from each industry to its various locations. It insures high quality and efficient production including difficult extrusion process.
Compared to general-purpose model, a larger motor can be equipped mainly for large-scale machine with screw diameter φ65mm or higher. It realizes high functionality.

Features

  • Molding of general-use resin and special formula resin
  • It is capable to handle various extrusions such as deformed object, tube, pipe, film, sheet, and wire coverings.
  • The extrusion is possible even under the operating conditions with heavy load and high thrust load.

GS extruder standard specifications

GS65 GS90 GS100 GS115 GS125
Throughput rate kg/h 40 - 150 70 - 200 100 - 350 100 - 400 120 - 450
Screw Diameter mm 65 90 100 115 125
L/D - 25 30 25 30 34 25 30 34 25 30 34 25 30 34
Acceptance of bent - - - - - -
Rotation speed min-1 - 200 - 200 - 200 - 200 - 150
Main motor kW 22 - 75 37 - 110 45 - 110 45 - 150 75 - 150
Cylinder heating classification - 4 5 5 5 6 5 5 6 5 5 6 5 6 7
Hopper capacity L 60 130 200 250 300
Machine center height mm 1100
Size of machine Length mm 2600 3000 3700 4200 4500 4000 4500 4900 4500 5100 5500 5400 6000 6500
Width mm 900 2300 2500 2600 3000
Height mm 1900 2200 2200 2200 2200
Machine net weight kg 1800 2300 2600 2900 3500 2900 3300 3800 4000 4500 4700 5800 6200 6600
GS135 GS150 GS200
Throughput rate kg/h 130 - 600 150 - 650 300 - 1200
Screw Diameter mm 135 150 200
L/D - 25 30 34 25 30 34 22 25 30 34
Acceptance of bent - - - - -
Rotation speed min-1 - 150 - 150 - 150
Main motor kW 75 - 180 90 - 200 110 - 250
Cylinder heating classification - 5 6 7 5 6 7 5 7 8 9
Hopper capacity L 350 400 500
Machine center height mm 1100
Size of machine Length mm 5600 6300 6800 5900 6200 7200 6400 7000 8000 8800
Width mm 3200 3300 4000
Height mm 2300 2300 2500
Machine net weight kg 7000 7500 7900 8500 9100 9800 13000 13400 14000 14600

Go to the top

SX series

Single-axis extruder

SX series are similar to multi-axis extruders rather than conventional single extruders. It is a single-axis extruder with brand-new functions that realizes plasticizing mix function. Cylinders and screws are specially designed to enable realistic low-temperature extrusion and large-volume extrusion.

Features

  • Extrusion capability which is more than double compared to that for general-purpose machine
  • It can process olefine-resin including PP and PE.
  • It is best for low-temperature extrusion of film and sheet, a large-volume extrusion and mixing and distribution of foaming substance.

SX extruder standard specifications

SX50 SX65 SX75 SX90 SX100 SX115 SX125
Throughput rate kg/h 80 - 100 80 - 200 120 - 300 150 - 400 200 - 600 400 - 800 500 - 900
Screw Diameter mm 50 65 75 90 100 115 125
L/D - 30 30 30 32 32 32 32
Acceptance of bent - - - - - - - -
Rotation speed min-1 - 150 - 150 - 150 - 150 - 150 - 120 - 120
Main motor kW 22 - 45 30 - 75 55 - 90 75 - 110 90 - 150 110 - 185 150 - 250
Cylinder heating classification - 5 5 5 5 6 6 6
Hopper capacity L 100 100 150 200 300 400 600
Machine center height mm 1100
Size of machine Length mm 2900 3000 3500 4200 4600 5000 5200
Width mm 700 800 800 900 1000 1000 1000
Height mm 1850 2100 2200 2200 2300 2300 2400
Machine net weight kg 2000 2700 3500 4400 5300 6000 7000

Go to the top

VS Series

Single-axis extruder

VS Series can handle variety of resin. It is possible to move the machine independently. So, it is possible to combine with other extruders. It has mostly the same specifications as that for small general purpose machine for materials whose diameters are less than φ50mm. It demonstrates sufficient performance even when it works alone.

Features

  • It can process various resin.
  • It can be used as an assistance extruder for two-color extrusion or a single extrusion machine.
  • It has excellent operability and productivity.
  • It is a space-saving model and can be easily relocated.

VS extruder standard specifications: Horizontal type

VS25 VS30 VS40 VS50
Throughput rate kg/h 3 - 10 5 - 25 10 - 35 15 - 60
Screw Diameter mm 25 30 40 50
L/D - 18 25 22 25 22 25 22 25
Acceptance of bent - - - - - - - - -
Rotation speed min-1 - 120 - 120 - 120 - 120
Main motor kW 0.75 - 3.7 2.2 - 3.7 3.7 - 15 7.5 - 15
Cylinder heating classification - 2 3 2 3 3 4 3 4
Hopper capacity L 7 20 30 40
Machine center height mm 1200±150 (Vertical travel motor type)
Turn φ 0 - 90
Size of machine Length mm 1100 1300 1400 1600 1800 1900 2300 2400
Width mm 800 1200 1600 1600
Height mm 2000 2000 2100 2100
Machine net weight kg 250 300 600 700 900 1100 1100 1300

Go to the top

COMBI series

Single-axis extruder

COMBI series are the extruders with minimum area required for installation. Two sets of general purpose machine were combined within a frame. Depending on formation purpose, various combinations are possible.

Features

  • Best machine for 2 color extrusion
  • Space-saving
  • Low-cost

CM type extruder standard specifications

CM53 CM64 CM74 CM75 CM95
FS50 VS30 FS65 VS40 FS75 VS40 FS75 VS50 FS90 VS50
Throughput rate kg/h 15-60 5-15 40-150 10-35 70-220 10-35 70-220 15-60 90-300 15-60
Screw Diameter mm 50 30 65 40 75 40 75 50 90 50
L/D - 25 , 28 22 , 25 25 , 28 22 , 25 25 , 28 22 , 25 25 , 28 22 , 25 25 , 28 22 , 25
Acceptance of bent - φ - φ - φ - φ - φ -
Rotation speed min-1 - 200 - 120 - 200 - 120 - 200 - 120 - 200 - 120 - 200 - 120
Main motor kW 7.5-30 2.2-3.7 15-45 3.7-15 30-75 3.7-15 30-75 7.5-15 45-90 7.5-15
Cylinder heating classification - 4 2 , 3 2 3 , 4 4 3 , 4 4 3 , 4 5 3 , 4
Hopper capacity L 40 25 60 30 80 30 80 30 130 40
Machine center height mm 1100 - 1100 - 1100 - 1100 - 1100 -
Size of machine Length mm 2700 3000 3500 3500 4000
Width mm 1500 1800 1200 1200 1900
Height mm 3000 3000 4000 4000 4000
Machine net weight kg 2100 2900 3800 4200 5000

Go to the top

SK series

Single-axis extruder

SK series divide the functions for conventional single-screw and developed each capability. In addition, it controlled them separately. Thus, it enjoys more freedom and fully performs the capability that an single-axis extruder has.

Features

  • Pellet extrusion of PVC and PE
  • It demonstrates excellent performance for film and sheet extrusion (PVC, PS, ABS), especially PVC's transparent sheet and two-axis drawing film.

SK extruder standard specifications

  SK90 SK115 SK135 SK150 SK200 SK/GTR SK/PCM
1st layer 2nd layer 1st 2nd 1st 2nd 1st 2nd 1st 2nd 1st 2nd 1st 2nd
Screw Diameter mm 90 80 100 115 100 115 135 125 150 135 200 170 GTR65
-110
GS100
-135
PCM30
-135
GS65
-200
L/D - 22 , 25 12 22 , 25 12 22 , 25 12 22 , 25 12 22 , 25 12 22 , 25 12 22 , 25 12
Acceptance of bent - φ - φ - φ - φ - φ - φ - φ -
Throughput rate kg/h 200 - 400 300 - 600 400 - 800 500 - 1200 800 - 2500 10 - 30 10 - 30

Go to the top